fbpx
COVID-19 – WE ARE OPEN For more information on how we are operating during the COVID-19 outbreak please click here

Can I Connect The Satellite Dish Directly To The TV?

TV aerials and satellite dishes both receive signals and send them to your screen. From news coverage to your favourite soap, aerials and dishes offer the same experience. Since they have the same task, there is a blurred line between the two. However, you can’t just replace one for the other. Let’s tackle common satellite and TV aerial questions and create a distinct line between what can and cannot work on both devices 

What Is The Difference Between A Satellite And An Aerial? 

The main difference between a satellite dish and an aerial is how they go about their job. Think about how these machines receive signals, a satellite is thousands of meters away from the tallest transmission tower. How can they be the same when the way they go about their job differs? The tech behind the machines supports its own format. 

What Is A Satellite Dish? 

Dishes have four parts: the feedhorn, the dish, the low-noise block downconverter (LNB), and the mount. Now, how do these parts work together? The dish reflects the signals from the satellite to a fixed point which creates a better signal for the feedhorn. From the feedhorn, the waves go to the LNB which converts it to a format that your TV satellite box can read. 

One of the many pitfalls of dishes is that they receive so many signals. The wrong direction or azimuth angle could affect the number of channels you receive. It can also affect the quality of the channels you have. So it is important to have decent reception.

Satellite TV can be for everyone. However, people who live in the countryside, away from the main transmitters benefit the most. 

What Is An Aerial? 

There are two different types of aerials, indoor and outdoor. The parts may vary depending on the type and model, but TV antennas have four components: dipole, directors, reflector, and the mount/mast. The dipole receives the signal sent by nearby TV transmitters. The directors and reflector in outdoor aerials help with reflecting and increasing the sensitivity of the signal. From the dipole, it runs through the coaxial cord that connects to your TV. 

TV aerials are popular in urban areas. As long as there is a TV tower within less than 50 miles, aerials should do the trick. The maximum range for a TV aerial is around 80 miles, but even then it’s a bit of a stretch. 

The ideas behind the two of ways of getting TV are the same, but they get their signals from different sources. Your TV dishes need to decode their signals, but your aerials do not. The types of signals they receive are different, so they cannot do each other’s job. Choose one and work around that. All you need for Freeview is a TV aerial. For Freesat, you need a TV dish and a Freesat box. 

Can I Connect The Satellite Dish Directly To The TV?

This question is a tricky one! Typically, the answer would be no. You cannot connect your satellite dish to your TV. The signals from satellites are in a different format since they come from such a far place. You need a satellite TV receiver to demodulate the signals from your dish. So, it is a coaxial cord to the set-top box and set-top box HDMI cable to your TV.

Now, what if you are not a part of the majority? Can I connect satellite dish directly to TV? If your TV has satellite support built-in for demodulating, then you can link to your TV. However, this has its pitfalls. No set-top box limits what you can do with your satellite dish. You can only get the Freesat channels in your area, no free international content. 

New TV models are more likely to have satellite support, but it is best to ask if your satellite TV ticks off all the boxes. Remember to confirm what the set-up would be if you brought the TV home. You can also try the TV brand’s customer service to make sure. 

Can You Connect A Freeview TV To A Satellite Dish?

Your TV can be for Freeview or Freesat channels as long as you have the right equipment. So yes, your previously Freeview TV can connect to a satellite dish. However, the set-up will not be the same. 

Aerials use terrestrial digital signals, while dishes don’t. If your TV does not have dual tuners or you don’t have a set-top box then, no you cannot connect your TV to a satellite dish. When you shift between the two, you need to get all the other equipment necessary to make it work. 

Can I Watch Freeview Channels With A Satellite Dish?

Sadly, you cannot watch Freeview with a satellite dish. If you love Freeview’s selection, it may be hard to consider using anything else. However, dishes come with their own set of free channels in Freesat. Freeview and Freesat are not the same, but they have similar selections.

Your TV can get over 200 radio and TV channels. BBC One, BBC Two, ITV, Channel 4, Channel 5, CBS Drama, Horror Channel, Pick, and Dave are some examples of what you can get with Freesat. Doesn’t that list look familiar?

You can also catch up on shows with BBC iPlayer, ITV Hub, Pop Fun, Ketchup TV, and CBS Catchup. These websites also have app versions for watching on the go. Other on-demand players like Netflix are not for free, though. 

What Should I Do If I Want To Watch Freeview?

When the Freesat experience is not for you, find a TV aerial, even a TV aerial from ye-olde-analogue days should work just fine. As long as you live near a TV transmitter, you should be able to enjoy Freeview channels.

When there are no TV transmitters near you, try to give Freesat another try. The direction and the azimuth angle is critical. Nowadays, you can even pick up on HD channels with Freesat. Try to give it a proper test run before getting a TV aerial.  

Can You Use A Sky Dish As An Aerial?

If you think about it, a satellite dish is an antenna in its way, a parabolic one. However, that does not mean it can do the same thing. You cannot use a dish as an aerial, though people have ways of repurposing an old Sky dish

Their version of repurposing is to make the satellite dish the mount. You can take out the LNB and attach your clip-on aerial there. Your coaxial cord will run from the TV aerial and not the dish itself. 

Now some people claim that you can modify it. Add parts for radio frequencies, and then you are good to go. However, there is no guarantee that this will work the way it should. 

You will end up purchasing parts anyway to make this modified version, might as well upgrade your dish. Pair your new dish with an old Sky box to watch your shows. Or do the quick fix for dishes with weak reception by switching out the LNB. You can also look for a TV aerial. There are many affordable models on the market. These methods are more effective and affordable than modifying anything.

Can You Connect Satellite To A TV Without The Box?

Like we mentioned earlier, you cannot connect your satellite to a TV without a box. The satellite receiver for TV is what decodes and demodulates the signal so you can view your shows. Only TVs that have satellite support for demodulation can connect to a satellite without a TV receiver box.

All these questions focus on making use of what you have without compromising your entertainment experience. If you have an old dish and a Freesat box, why bother with Freeview? An old aerial can still get you Freeview. When these things don’t work, you can call us at AerialForce to install a new dish or aerial.

Having BT Youview Box Problems? Here’s What You Can Do To Fix It!

There’s nothing worse than encountering BT YouView box problems when you’re already comfortable in bed or on your couch while watching your favourite show or movie. It’s annoying, frustrating, and quite frankly, definitely a mood-killer! 

Fortunately, whether you’re dealing with signal loss, missing channels, distorted or pixelated picture, spotty audio, a faulty remote control or recording problems, BT Youview box troubleshooting is not as difficult as you’d think. 

So, if you’re looking to fix the issue on your Youview box yourself, you’ve come to the right place! Read on to find out just exactly what you can do to get back to your programmes as soon as possible!

The Most Common BT Youview Box Issues And How To Fix Them

Before you go and contact customer BT’s customer support, it is best for you to try and address your BT box issues yourself. Here are some of the most common BT Youview Box issues and how you can fix them:

Poor TV Signals

“Your TV signal is weak or lost.” 

If this message appears on your screen, try to figure out if the issue is isolated in one channel, or it’s affecting everything. If it is isolated to one channel, then it could be weak signal transmission from their end. However, If it’s the latter, then you may be experiencing intermittent aerial connection. 

If this is the case, you may want to check out the positioning of your TV aerial or the quality of your aerial installation. A few adjustments to your aerial may just fix this issue.

You may also want to try checking the signal quality in your BT box’s settings menu. If your set top box is receiving signals that are too strong, it is also likely for it to overload the Youview BT box, hence causing poor TV signals. If you think this is the problem, try reducing the signal level to 85 or 90%. You may also use a TV Signal attenuator to address this issue. 

Missing channels on your BT TV box could also be a result of poor TV reception. If this is the case, perform the same troubleshooting steps above. 

Audio or Video Issues

If you are experiencing pixelated or broken up pictures and delayed or missing audio, restart your TV system. Your set top box and TV probably just need a quick reset to start working properly again. 

However, if restarting your device does not work, then you could be having network issues. 

If you are having network or broadband connection issues, make sure the issue isn’t from the service provider’s end or check if your phone line is working. If neither of these is the root of the issue, restart your BT Hub.

Many network problems are often fixed by simply restarting the connection, so there is a likely chance that you will be able to resolve your broadband issues this way. After restarting, check if the lights on your hub are powered on. 

BT Box Is Not Working At All

If your BT Youview is frozen or stuck on loading, all you have to do is restart your BT Box. If this does not do the trick, then your device may be due for a software update. 

To check for a software update, follow the steps below:

  • Press the YouView button, select settings
  • Go to the Information & Reset sub-menu. 
  • Select Software Information.
  • Click Update Software.

If this does not work, you may have to do a full factory reset. However, when you reset your BT box, you may lose your existing recordings. To prevent this from happening, try resetting your device on maintenance mode

No Blinking Lights

If there are no lights on your BT Youview box or box connectors, it is either not working, or not receiving enough power. 

Check if the power is switched on and if everything is securely connected. If you find that neither is the issue, you may have to replace your connectors and powerline adapters. 

Stuck On Maintenance Mode

When you try to start the box and see that it is stuck on the red light or on maintenance mode, immediately try restarting the box. If this does not work, press the arrow button on the box to enter maintenance mode. Follow the prompt and check if the indicator light is blue. 

If this does not work, you may have to do a hard reset. 

Recording Issues

Recording issues are normally caused by poor broadband connection or poor Freeview signal. To make sure you successfully record a programme or channel, you have to ensure that the channel you want to record can be viewed properly. 

Make sure that your BT Youview Box stays on during the whole duration of your recording. Turning it off will also prevent you from recording anything. 

Lastly, check the list of your scheduled recordings on your My TV menu. Any overlaps will cause problems for your recordings.

Remote Control Is Not Working

Now, this one is quite simple. In most cases, all you need to get your remote control working again is a fresh set of batteries. 

Also, check for the connection between your remote and the TV box. If the light on your remote control is blinking, but the TV box is not responding, you may have to reboot your TV Box. However, if this is not the case, you may want to reset, or worse replace your remote control.

What Happens When None Of The Troubleshooting Methods Work?

If none of the troubleshooting methods above work, you may have to replace altogether your BT YouView box. If you think your box is still salvageable but are not entirely sure on how to fix the issue, ask an aerial TV professional from your neighbourhood or from companies like AerialForce to assess your BT box and TV aerial, and address these issues themselves. 

Final Thoughts

Save yourself the frustration and stress that comes with being to address any issues that cut into your TV viewing and leisure time! Keep these troubleshooting methods handy to make sure you’re ready the next time you experience any of these issues! 

How Do I Find the Nearest TV Transmitter to My Postcode?

TV towers aren’t just tall skyscrapers that you admire from a distance. Besides adding to the city skyline, they have a vital role in making sure your favourite soap reaches your TV. They do the grunt work of making sure every home with a TV aerial gets their Freeview channels. With over 18 million households using Freeview, you can see why it takes a whole network of transmitters to reach every neighbourhood. In summary, they’re the reason you’re able to watch Frasier, Line of Duty, and Normal People.

Unfortunately, you might not experience your shows the way you want to because of technical problems. Like all technology, a little bit of know-how can go a long way. Here are a couple of questions to help you understand your TV aerial and TV transmitter a bit better: 

Why Can’t I Watch My Shows? 

Even with great reception, you can lose channels a little bit over time. It is the reality of the cable cutter experience. If you have problems with your TV channels, first check if they are available in your area. You can do this by visiting the Freeview website and typing in your postcode to see what channels reach your neighbourhood. If the list online and channels on your TV do not match, then there are three possible problems: 

  1. Faulty transmitter
  2. Faulty aerial
  3. Signal disruptions (obstructions, heavy rainfall, etc.)

Faulty Transmitter 

If you are struggling to get reception, check your local transmitter through BBC’s or Freeview’s site. You can see the active towers near you. You need to enter your postcode and house number to get accurate information. The checker will show you a map of your area and the nearest TV transmitter and its current status, whether it’s good, varied, or faulty.

If a TV transmitter near me is not working, it would be red. I can look around for the nearest TV transmitter to me in the green/good to try to connect to their service. Its coverage should reach me for it to be a proper replacement.

If you have a faulty transmitter, try to look for a new one within the area. These TV towers often overlap in urban areas, so you can quickly remedy the reading by adjusting your aerial. If there are no other towers near you, you may have to wait until it is up and running again. 

Faulty Aerial 

The next thing you should consider when the TV towers have no problems is your own aerial. Aerials are fickle things. They need to face the right direction and to be in the proper angle before you can enjoy your channels. 

On top of that, outdoor aerials have to brave the elements. A torrential downpour of rain could affect your aerial’s position, making it harder to receive any signal. Indoor aerials are no better. While they don’t experience the same wear and tear, they are not that strong. Other types of signal interference could affect your aerial.

Try to test out different positions for your indoor or outdoor aerial. Try to see if the quality of your show becomes clearer or not. If you have no luck making it work with the right angle and direction, it might be time to replace it. Check out 

Environment Issues

Before you replace your aerial, try to inspect your surroundings. There might be environmental changes that affect your reception. Are there new trees, buildings, or posts? Just because you do not see these changes in your immediate area, doesn’t mean they aren’t there. 

People who live in valleys and wooded areas are more sensitive to this. A TV transmitter doesn’t cover these areas evenly. Most homes here depend on relay transmitters. If the relay transmitter near you has problems, it could affect your viewing experience as well. 

How Can I Improve My Signal?

Improving your signal starts with addressing the previous problems. Even if you do not lose your channels, those steps can help you get better reception. You can upgrade your aerials with models that can handle interference better. 

You can switch between transmitters. For example, the nearest TV transmitter to my postcode in Surrey is Freeview’s Reigate transmitter, but Crystal Palace is south enough for my aerial to pick up. I could try Crystal Palace even though it’s farther because it has more channels. The distance is not the only thing that affects your reception, so a transmitter that is farther but offers more channels might be more effective. 

Since not every area may have a tower, I could also check maps for TV transmitters near me and not the nearest TV transmitters to me. There is a difference. Instead of looking at your postcode, focus on the miles instead. It will give me more things to try, and from there I can compare the different signals. It can be an excellent benchmark. 

You may opt to get a TV signals booster. However, signal boosters have a history of mixed results since they can sometimes get the wrong signals. Read more about signal boosters here

Where Is My Nearest TV Transmitter?

There are several ways you can look for your nearest TV transmitter. You can check Ofcom’s transmitter location maps on their website for the digital switchover plans. You can get the names of the transmitters and towers and look it up in Google maps. 

You can also check the UK Free TV website for news on transmitter repair work and Freeview transmitters across the country. Take note of the direction it is in and adjust your aerial accordingly.

So how do you know if the TV transmitter you found is the right one? There are two ways you can do it. The first is to compare your aerial with your neighbour and the second is to look up your postcode.

Look At Your Neighbour’s Aerial

People who value their privacy might feel uncomfortable at the idea of posting small details of themselves online. When you enter information online, the cookies may remember them. You can always opt to clear your cookies history to remove personal information online. 

If you do not want to check your postcode, you can do the age-old method of following the crowd. Look at your neighbour’s homes and see what direction their outdoor aerials face and follow suit. All aerials try to look towards the TV transmitter.

You can try to check 5 different homes to see if there are other key directions. Pay close attention to the houses who had theirs professionally done. They have the ideal direction and position. You could also ask around if you are close to your neighbours. 

Now, this method will not help in areas with relay transmitters. Large outdoor aerials may face the main transmitter while the smaller indoor aerials go towards the relay transmitters. In this situation, trial and error is the best way to figure out which one is best. 

Look Up Your Postcode

All transmitter maps require your postcode. To get precise information, you may have to give that along with your house number if your neighbourhood is big. Remember to clear your cookies history if you include your house number as a precaution. Enter these details on the online TV transmitter maps website to see which one is closest to you. 

When you input your postcode, take note of the distance between you and the tower. TV aerials do not have a lot of coverage. While they may seem close on the map, the numbers on your antenna may beg to differ. 

For people who live in rural areas be wary of aerials that advertise 80 miles and more for their range. The upper end of that should also be an outdoor aerial, not an indoor one. Advertisers tend to stretch their specs, so conservative estimates are more likely to be true. 

Which Way Should I Point My TV Aerial?

Always point your TV aerial in the direction of your TV transmitter. You can use a compass, to match the coordinates on the maps. Or use Google maps and rotate to properly orient yourself.

Now, there is an exception to this rule. It is when you have a clear obstruction in that same direction. Massive buildings, posts, trees, and other similar things block the signals for your TV aerial. Try to look for a clear space to install your antenna. 

In urban areas, signal interference is also common. The signals from cars, homes, and businesses can affect your reception. Try to avoid those as well. 

The same rules apply for your indoor aerial. Stay close to windows and avoid significant obstructions. Keep your aerial away from other devices that might produce signals that conflict with your aerial. Try to keep your aerials as high as possible too. 

Where Are TV Transmitters Typically Located?

Ofcom regulates where the TV transmitters are so there will be minimal interference. Besides that, there is little information about the factors that go into their location. Most of them tend to be in populated areas. In the countryside, they stay near the central regions to get the most coverage. Since TV transmitters have minimal coverage in these types of areas, most people opt for satellite dishes instead. 

How Can I Check The TV Signal Strength In My Area?

With no extra gadgets, the best way to test for TV signal strength is to have all the channels listed in the TV guide website. They already took into account the loss for your area. If it says you should get 122 channels, but you only get 80, then the signal strength is weak. You can manually try different setups until you find the majority, if not all, of the channels.  

You can also buy an aerial signal meter. Detach the coaxial cord from your TV set and input it to your meter and attach your meter cord to your TV. Rotate your aerial while you take note of the signal strengths each time. The more LED lights go green, the stronger the signal. You can do this several times until you narrow it down to the best angle. 

Over the counter meters have mixed results, so try to buy the ones your friends and family use. You can also opt to get a professional to do this. They have the gear and equipment to get the best TV signal strength. 

No matter how great the tech, TV aerials still have a bit of guesswork. Online TV guides and transmitter maps are excellent references for you to check your reception, but the ever-changing environment prevents this from being a fool-proof plan. Hopefully, with a lot of patience and luck, you can see the difference and return to your regular programs in no time. 

If doing all of these steps still doesn’t give you a proper reception, then it may be time for you to call the professionals. We, at Aerialforce, can come to your house on the same day of your distress call so you can continue to watch your favourite shows without any problems.





How to Update Sky Box

Sky Box Software Updates

Sky Boxes receive software updates from time to time. Software updates are delivered through satellite to make changes in your Sky Box. These changes are usually improvements to the performance of your Sky Box such as new exciting features and bug fixes for system problems so you should welcome them with open arms. However, updating can be quite a tedious process if you don’t know how. That is why we have created this article to help you on how to update your sky box.

Sky Boxes, whether it is a Sky+ HD box or a Sky Q box, get updates and install them automatically. However, these Sky Boxes become unreliable and glitches when they are switched off or disconnected for a long period of time. For instances like this, you have to manually update them.

How to Update Your Sky Box Manually

Due to the advancement in TV technology and the rise of TV on-demand, manually updating your Sky Box seems to be a thing of the past. However, there are some instances where you still need to update it manually before you can watch with your TV. Here is a guide on how to manually update Sky Box to the latest software. This guide provides step-by-step instructions for both the Sky+HD box and Sky Q box.

Updating Your Sky+HD Box

You can download your Sky Com Software Update for your Sky+HD box by following the instructions below:

  1. Press the standby button using your remote.
  2. Switch off the Sky+HD Box and disconnect it from the power supply. Also, turn off the other devices connected to the box. Wait for at least a minute.
  3. On the top panel of the box, press and hold the backup button. While pressing the backup button, turn the power supply back on.
  4. Keep pressing the backup button until the box resets. You’ll know this when all four LEDs in front of the box light up. You should now see the software update screen on your TV screen.

Note: If all the four LEDs still do not light up even after pressing the backup button for 30 seconds, repeat this step. If the lights still do not appear, it is best to ask for professional help. Aerialforce has Satellite TV Engineers all over the UK who can help you with your Sky Box.

  1. Do not disconnect the Sky+HD Box from the power supply or satellite dish while the software is updating. Doing so may cause permanent damage to your Sky Box. While waiting for the search and download to finish, we advise you to switch the TV to another screen to avoid screen burn.

Note: The software update screen will stay on the screen for about 5 to 10 minutes, until the download finishes. If the download seems to be stuck, try disconnecting the Sky Box from the power supply. Wait for 5 minutes, then repeat all the steps.

  1. You will know the software update has finished when the four LED lights disappear. The box will then switch to standby.
  2. Wait for at least 3 minutes before switching the Sky+HD Box back on. A green LED will light up on the front panel of your box. You can now watch your favourite shows and videos on your TV.

Updating Your Sky Q Box

You can download the Sky Q Software Update for your Sky Q box by following the instructions below:

  1. Go to the Settings of your Sky Q box. Under the System Info, highlight Software version.
  2. Choose Setup
  3. Start the download by clicking Software download.
  4. The search and download take about 10 minutes to finish. Make sure that the box is not turned off or disconnected from the power supply while the software is updating.
  5. You can check the status of the Software update by going to the Settings. Choose System Info then highlight Software version.
  6. When it says “Software update successful” it means your Sky Q Box is now updated to the latest software version. You just need to wrap up your download by pressing the Standby button on your remote.
  7. Your box will then restart. Once it restarts, follow the on-screen instructions. Your Sky Q Box should then be on the latest software version, and you can now watch your favourite shows on your TV.

Note: If you are seeing hard disk error messages on your screen, you need to know how to reboot Sky Q Box. Hard disk errors prevent your TV to set or play videos and recordings. It may also hinder your TV to search for features like videos on demand. Click here to learn how to reset q box.

If these steps do not work, you may be dealing with a bigger problem. We advise you to ask for professional help and leave these problems to the experts. Aerialforce has Satellite TV Engineers who have years of experience in offering same-day satellite TV services.  Just search our site or contact us, and we’ll be there to assist you right away.



A Comprehensive Guide for TV Antennas: How to Choose the Right Kind

Cord cutters spend years perfecting their access to free TV channels. The two ways you can achieve this by installing a satellite dish or a TV antenna/aerial. The TV antenna is the most affordable option, but because of the accessibility, it is tricky to navigate the market. How do you choose the right TV antenna for your home? Take note of the following information:

What Does A TV Antenna Do?

Your TV antennas catch signals from TV transmitters near you. They use different radio frequencies to carry digital content to your receiver. Your TV receives those signals and converts them into your favourite shows. Viola! Free channels without a monthly subscription. 

The TV antenna works with two different broadcasting frequencies: VHF (Very High Frequency) and UHF (Ultra High Frequency), however, that system of separate channels on different frequencies is not used in the UK anymore. Right now they use OFDM (Orthogonal Frequency-Division Multiplexing) to bundle channels in multiplexes (MUX) and send digital content through radio waves. The new system is a more efficient way to send channels, and it improves the number of channels you can receive. 

Analogue TV users, however, will not be able to receive digital terrestrial broadcasted shows and may need a setup box or digital TV. This rule also applies to people who want to watch HD channels. They need HD TV antennas and an HD TV set to be able to enjoy the format. It is a matter of matching the format of the content to the receiver. 

How Do I Select The Right TV Antenna?

With an overly saturated market, it is hard to find the right TV antenna. But make no mistake, these options work in your favour! The right TV antenna depends on a lot of factors. The set up of our home, the local terrain, the distance of the TV transmitters, and the type of TV you have are all variables you need to consider. 

Where Are You? Urban Vs Rural

  Identify your current location. Do you live in an urban area with tall buildings, compact living spaces, and lots of frequency traffic? The city has many things that can obstruct signal, but at the same time are relatively close to transmitters. You have to find the balance between enjoying strong reception but also deal with signal interference.

  Rural locations may deal with distance or obstruction issues. Cities may be similar, but the countryside has more variations. Forests, mountains, and hills you do not know what could make or break your reception. Even a tree beside your home can affect your TV antenna. Break down the unique issues of your home. You can use your postal code to see what you should be able to access Freeview. 

 TV Transmitters Near You

  The next thing you need to be aware of is the distance between you and the nearest TV transmitter. Search online for the ones in your immediate vicinity, take note of as many as possible. The signals you receive from TV transmitters vary. You may be close to Tower A, but also have a lot of interference from 4G, 5G, or tetra. Tower B that is a bit farther but has no obstruction, can work better for you. Plot these out and figure out the range you need to access the most of them while staying in the mileage of most TV antennas. 

 Please bear in mind that TV antennas that promise an excessive range, around 50 miles upwards without being an outdoor TV aerial, is most likely a marketing gimmick. It will not deliver the results they promise, and that could be a couple of pounds down the drain. 

 Indoor vs Outdoor TV Antennas

  Not everyone has the option to install an outdoor TV aerial. You could be in a flat or a house where landlord restrictions are king. If they do not want anything mounted on the roof, you have no other option but to get an indoor TV antenna. 

  For the people who have the option of choice, consider the antenna range you need and the space to install your aerial. If you need 50 miles or more, get an outdoor TV antenna and mount it on the roof. If you do not want to mount it on the roof because of safety issues, you can try to install it inside your attic. 

Your attic should be free from extra clutter. Those odds and ends crowding your attic can affect your TV aerial. Try to keep the TV antenna as close to the windows. Place it in the direction that has the least amount of obstruction outside. The height and less insulated walls make it easier to pick up signals, though aerials for attics cannot compare to those mounted on the roof.

 If you live close to a TV transmitter, an indoor TV antenna is good enough. From the old rabbit ears moved now and then to the thin, sleek versions that can stick to your windows, indoor aerials have come a long way in design. You can take your pick depending on your home layout. 

As a general rule of thumb, don’t fall for excessive ranges, but try to get more than the bare minimum required. Try to find that balance. You can check reviews about how different models perform with their promised range. 

What Is The Best Antenna For Free TV?

 There is no one-size-fits-all antenna for Free TV. You can get the most out of free channels when you pick up the best reception. The best reception needs the right angle and position. Amazon’s top pick for TV antennas is Easing’s Indoor TV aerial, and their pick of outdoor TV aerials is SLx DigiDome. However, the best seller listed on the site is Firmrock’s Indoor TV aerial. Both models have a 50-mile range and support digital TV. 

 Other top picks are Mohu ReLeaf HDTV antenna (or anything in their range) and AmazonBasics Indoor Flat TV antenna for indoors, and the Winegard Elite 7550 and the 1byone Amplified HDTV antennas for the outdoors. You can improve the output of these HDTV antennas by changing to an RG6 coaxial cable for good measure. 

What Channels Can You Get With A TV Antenna?

 There are over 70 channels available. You can check the Freeview’s TV guide for the channels available in your area and the schedule for the week. You can catch shows from BBC, BBC One, BBC Two, ITV, Channel 4, Channel 5, Quest, and Dave. You can get CBeebies, CBBC, Pop, and Ketchup TV for the children in your home. There are many channels available, and you could spend days exploring what is available in your area. 

How Do You Get A TV Antenna?

 TV antennas are easy to find you can find it from your local electronics stores. Or large chains like Amazon, Argos, and Currys. Models available may vary depending on the store, and the models you have researched might not be there. The prices of these TV antennas range from £ 10- £60, with outdoor TV aerials in the upper end. Check their online inventory or call ahead to ask about them.

 You could also opt to work with professional TV antenna installers like Aerialforce. We can provide top of the range models that come with a 1-3 year warranty. You get to have the added experience of our engineers and enjoy the best reception possible. 

Do TV Antenna Boosters Really Work?

When you are trying to improve your viewing experience, you can consider TV antenna boosters or amplifiers. Context is critical in using this device in the right way. Your TV antenna boosters do not give you more range. It does not improve your reception. TV antenna boosters are there to strengthen your existing signal which should be in the 50dB to 55dB, anything less is inferior and your booster will do nothing for you. 

 People who claim that the boosters don’t work, are merely using it for the wrong reasons. Boosters, when unnecessary, can ruin your viewing experience by amplifying false signals. The only time TV antenna boosters come into play are when you live far away or in areas with a lot of obstruction. Homes in the city may not need it outright, but homes in rural areas would benefit from having them. It is especially helpful in homes that use multiple devices.

 Some TV antennas come with these boosters in the kit. You can buy your boosters separately. Be wary about the quality of your antenna boosters, and try to stick to recognizable manufacturing brands to stay safe. If the ones from your local stores work fine, then you can go with it. If you do not receive the results you want, you might have a faulty device and better get a replacement. 

 Hopefully, you are now fully informed about TV antennas/aerials, and that this answers most of your questions. The best purchases are made when they are well-researched. Apply all the tips mentioned, and you could find the TV antenna that best suits your home! To ensure that you get the best signal reception in  your house, call the professionals like Aerialforce! We guarantee quality and fast service.



What is Motorised Satellite Dish?

Satellite dishes and aerials have been the backbone of free entertainment for years since its introduction to the TV industry in the 70s. It has adapted to the needs of the market. In the beginning, satellite dishes had poor reception and shoddy picture quality. The dishes were sensitive and filled with technical issues that needed to be consistently troubleshot. The demand for better quality and more shows made the mobile version increasingly popular over the years. 

What Is A Motorised Satellite Dish?

A motorised satellite dish builds on top of the existing model. The components are a dish/ reflector, feed horn, LNB, and a receiver. The only difference between the two? Mobility. The added motor helps change the direction of the satellite dish. It provides more range, and, by extension, more satellites and content. 

Mobility solves the problem of poor reception and limited access to broadcasted channels. It also takes care of the everyday struggles of manually adjusting the satellite dish. While it made the use of satellite dishes easier, the important aspects haven’t changed. 

The initial installation continues to play an important part. The motorised element allows for more freedom. You can continually hunt for new channels, and never reach the end of it. You might be surprised at what you could find. 

How Does A Motorised Satellite Dish Work?

A motorised satellite dish works in the same way that a regular one does. The signal from the satellite would hit the reflector/dish. Then it would bounce off the dish and head towards the feed horn. From there, the LNB converts the signal and sends it to the receiver inside the building. From the receiver, it goes to your TV set where it displays moving images for your watching pleasure. 

For the motorised aspect, you could use the sat finder to control the direction of the satellite dish. You could watch a couple of shows and reset your system when you are finished. You won’t have to choose between two different satellites and could switch between the two when you want. 

You do not need a separate power supply for your motor. That additional feature was only applicable to really old models in the early 2000s. The power from the coaxial cord is enough to support the engine. 

How Do You Set Up A Motorised Satellite Dish in the UK?

There are plenty of challenges when setting up your motorised satellite dish at home. However, nothing ventured, nothing gained, right? The materials and instructions might not be the same, but you could use the following as a reference. Consulting the manufacturer’s manual should be helpful. 

Materials You Need

You could go about the materials in two ways: a complete kit or individual parts. If you have decided to get it by parts, there are three components you should have: a motorised mount, satellite dish, and a receiver. If you chose the kit, it should have everything included. 

Assemble The Parts

The first thing you should assemble is your satellite dish. The dish attaches to the mount and screws into place. The next piece is the LNB. After you have created the satellite dish, install your motor to your post. Level your post before you install the motor. Once the engine is in place, you can connect it to the satellite dish mount. 

Azimuth Angle

Your motorised satellite dish should be pointed at the azimuth angle. The azimuth is the angle between a celestial body, or in this case, your satellite, and the North ( 0 degrees), measured clockwise along the plane (from left to right). There is no fixed azimuth angle. It depends on your location. 

You can search for azimuth angle calculators online or manually do it with a compass. If this is too difficult, you can try a sat finder and adjust to the coordinated given or hire a professional. Satellite dishes are sensitive, and they need to be as accurate as they can be or else the quality of your Freesat channels will suffer.  

Elevation Angle

After you find your azimuth angle, you need to find your elevation angle. It is similar to the azimuth, but instead of your longitude being zero, it is your latitude, and the angle is from our plane moving up towards the celestial body, or satellite. 

After you finish these steps, you can scan for channels and finetune your connection. You can also test out your motor and see what other satellites are near you. Count yourself lucky if you can enjoy more than two with good quality!

How Does Dish TV Work?

Dish TV channels follow this chain: from programming source to the broadcast centre, from the broadcast centre to the satellite, and then to your satellite dish and TV. Now channels are packaged together in a bundle to compete with other types of TV like aerial, cable, and internet subscriptions. Every country with satellite TV has its own units. When countries are close together, you can catch these signals. It is unavoidable for them, and an unexpected perk that people have been enjoying for years. 

Can I Pick Up Foreign Channels?

Motorized satellite dishes can pick up more than the static ones. It is possible to pick up foreign channels, or at the very least, channels that aren’t for your immediate area. If you live in the South of the UK, you can pick up signals from France and Germany. The Astra 1 at 19 degrees east, Eutelsat Hot Bird at 13 degrees east, and Atlantic Bird 3 at 5 degrees west, these are some of the satellites you might be able to pick up. They cover French, German, Italian, and Pan-Asian shows, though this may vary. 

If you live in the North of the UK, it is a bit trickier. You need to have a bigger satellite to pick up these signals. If people in the South can get by with a zone one satellite, the North needs a zone 2 version, nothing less than 63 cm can do the trick. 

What Satellite Dish Does Dish Network Use?

Dish Network uses Echostar XIV and XV, Anik F3, and Ciel-2 satellites as of now. These satellites are subject to change over time. Many Brits who have spent time abroad wonder if they can use Dish Network in the UK. Dish Network, also known as DISH, is an American satellite TV company. Sadly, there is no way you can connect to these satellites. Their units are below the UK horizon, and it is impossible to get a usable signal. 

Dish Network considered expanding to the UK, but as of now, nothing has come of negotiations. It does not seem like it would change any time soon. You may have to settle for online streaming subscriptions for US-specific content. 

How To Troubleshoot Your Motorised Satellite Dish?

In the event, your motorised satellite dish doesn’t work as well as it should, try to diagnose the problem. Are there any changes in the local environment? A taller tree, a new building, or massive signboards are things that can obstruct your signal. If this is the case, use your motorised satellite and find a new position that is clear. 

When the environment has no issues, consider the weather. Was there a storm that could have damaged parts of your set up? Inspect the model and try to repair it the best you can. 

Now environmental issues are not the only cause. When nothing out of the ordinary happened, consider replacing your LNB. There could be damage with how it filters out signals. 

When you find yourself at wit’s end, hire professionals like Aerialforce to install or diagnose your motorised satellite dish. Unlike furniture, satellites are not that simple to fix. The stress from finding the right angle and position can easily overwhelm and dishearten. 

Your motorised satellite dish is out to improve your entertainment at home, not to cause you long term stress. It is an investment that you could splurge on and get advice from experienced engineers in the business. When you have your motorised satellite up and working have fun with the system. Explore what the satellites have to offer and take note of your favourite ones. When done right, your Freesat channels can be quite enjoyable. 



What Is A Coaxial Cable and What Does It Do?

A coaxial cable or a coax is a type of cable that is used as transmission lines for radio frequency, video, and data signals. Traditionally, they have been used as feed lines to connect transmitters and receivers with antennas, internet connections, digital audio and cable television signals. 

This is why such cables are used in almost every home for television and internet connections, as well as in industrial settings for Local Area Networks. It is one of the most preferred types of cable because of its shielding and resistance to signal interferences from motors and other electronic equipment. 

It has multiple layers namely an inner conductor, an insulating layer, a conductive shielding and an insulating outer jacket. Most coaxial cables even have outer jackets that are UV, chemical, halogen and flame resistant, making it the best option, even for industrial settings. Its shielded design even allows for quick data transmission without succumbing to the interference or damage from outside or environmental factors.

They work by carrying data into the centre conductor while the surrounding layers of shielding (which is collectively known as the shield, restrict any attenuation loss and help reduce EMI. The first layer, meanwhile, provides distance and insulation between the core conductor and the outer layers. 

What Does A Coaxial Cable Look Like?

Coax cables have a distinct thick, round shape due to its interior insulation layer. Because of its size, its look also differs significantly from other cable types. 

Coaxial cables come in many sizes, but the most common sizes are the RG-59, RG-11, and RG-6 cables. For non-industrial use, the most common coax cable used is the RG6 cable, while industrial installers, on the other hand, may use thicker cables like the RG11.

As for the colour, a coaxial cable normally comes in black, white or brown. 

Coaxial Cable Types and What Exactly They Are Used For

As mentioned above, coax cables are classified by their sizes. Here is a quick overview of what each coax cable type is used for. 

  • RG-6 Coaxial Cables – RG6 cables are ideal for television, the internet, and digital video. Because RG-6 cables are made with a different kind of shielding and have an impedance of 75 Ohm, they can carry GHz signals more effectively, making them best for tv aerials or domestic television, internet connections, and digital video signals.
  • RG-11 Coaxial Cables – Such cables are best used for HDTV. Because it offers a higher gauge which provides more space for signals to transfer, it is adept at transferring strong HD signals at high speed. It is also often used as a long-length backbone cable. End-users of RG-11 coax cables benefit from higher signal quality not just for TV, cable, and internet transmission.
  • RG-59 Coaxial Cables – This kind of cable is best for CCTV systems. While RG6 cables can run longer distances without loss to video signal, RG-59 cables are much convenient to work with. 
  • RF Coaxial Cables – An RF or Radio Frequency coaxial cable is used to carry radio frequency signals. These cables are the standard input cable on TV sets. It usually has a coax plug or pin, which you can simply plug to the RF input on the device. 

Coaxial Cable Connectors, Coaxial Splitters and Coaxial Ports

Cable Connectors

Coaxial cable connectors are used to connect your coax cable to another device while maintaining its shielding. These connectors could be classified into male or female. Male connectors have metal pins which protrude from the centre, while female connectors have a recessed hole where the pin is plugged into. 

These connectors are used for RF equipment, test instruments, radio, television and video signal, mobile phone connections, broadcast communications systems and many more. 

Coaxial Splitters

Because coaxial cable lines are produced to provide a signal to power a singular device, you will encounter a problem if you try using it to power more than one device. Coaxial splitters are used when there is more than one device that requires a signal. True to its name, it is designed to split the signal from one coaxial cable towards several lines to connect to multiple devices. 

Coaxial Ports

A coax port is a single female RCA connector on a device. It will most likely be labelled as “coaxial,” “digital out” or “digital in.” This port is usually colour-coded orange or black, where a male coax is to be plugged in. 

The Advantages and Disadvantages of Coaxial Cables

Coaxial cables are pretty advantageous. Such cables are inexpensive compared to fibre optic cables, durable, easy to install, and easy to expand with a cable extension kit. Additionally, coax cables have good resistance to EMI and RFI, lower error rates, as well as a transfer capacity of approximately 10mbps. 

Moreover, coaxial cables are beneficial for both analogue and digital transmission, as compared to twisted pair cables and fibre optic cables, which are only capable of supporting analogue and digital, respectively.

However, coaxial cables still have a few drawbacks. Some of which come to mind are its susceptibility to total system or network failure, bulkiness, stiffness, and vulnerability to security breaches. 

Final Thoughts

Now that you’ve got a much clearer understanding on what a coaxial cable is for, you’re probably ready to start on that DIY project that has got you looking up coaxial cables in the first place. However, if you are planning on installing a TV aerial, setting up a CCTV system in your home, or simply looking to extend your tv broadband, it would probably much safer for you to put the coaxial cable down and let the professionals work on it. This will not only ensure your safety but also save you all the frustration of trying to get everything done yourself!

What To Do When There’s No Sky Signal

Imagine this. You made sure to have all your chores finished just in time for your favourite TV programme. You make it to the living room with a bowl of chips, sit down on the couch, and turn on the television. To your horror, your Sky box shows the words: “Sky No signal.” In only a few moments, your show will have started, and your Sky box won’t be available to record the video. What do you do? While you may try contacting Sky for an engineer, we know from experience that they might not be able to visit you until a few days later. You need your signal fixed immediately.

There’s good news waiting for you: you don’t have to tear your hair out because there’s no sky signal. And the even better news is that you can troubleshoot your Sky box without having to wait for a technician.

Diagnose the Problem

There are a lot of reasons as to why your Sky box has no signal on tv. If the weather is bad in your area or if you hear the wind howling outside, this will definitely reduce the quality of your sound and image. We recommend waiting out the storm until testing your system’s satellite signal again. If weather conditions are favourable, try changing the channel and see if your Sky box still doesn’t have a satellite signal. Should the other channels work fine, you can wait a few minutes before going back to the previous channel; but if things still aren’t looking great, then your network coverage might have a problem.

Check your service status. You can also send them a message if you have their contact details. If there happens to be a network outage in your area, we recommend waiting that out, as well. If there are no such reports of Sky being unable to provide satellite signal, reboot your Sky box and check if any of the cables are loose. These are the basic techniques that generally save a lot of time and solve the majority of signal problems with Sky.

Resetting your Sky Box

Click the ‘Standby’ button on your remote. If your model has PVR or recording capability, you will need to wait for the hard drive to stop spinning for a short while. Once it ends, you may switch off your Sky box, your TV, and other devices that are connected to it. You will also need to switch off your mains and disconnect your Sky box.

Take note: When inspecting it, make sure not to take the small plug out of the power socket at the back of the device. When the power is on, take care not to touch the plug as this can cause damage to the internal circuits, and an internal fuse may fry up.

Look for the HDMI and SCART cables attached at the Skybox’s rear. All of these should be firmly attached to both the television and the Skybox. After tightening connections, wait for five minutes before switching everything back on. This allows the capacitors inside the satellite receiver to completely discharge and cool down. There will be times that your satellite receiver freezes and an excellent way to break this is to do a complete reboot. After turning it back on, you might notice that the Sky logo will flash across the screen. This is the start of the initialisation process. Make sure to wait for a few minutes before trying to change the channel to prevent the Sky box from being overloaded with commands.

Correcting your TV Source

If the words ‘No Signal’ are coming from your television screen and not your Sky box, check the cables once again. This could mean that your Sky box is working correctly, but your cables are not configured properly. If this is the case, double-check if your Sky box is on, with the green light showing. Then go to your handset and press ‘TV’ and then ‘Help’. If the handset is not configured to your TV, you will have to your television’s handset instead. Look for the words source, input, or AV. Depending on the manufacturer, this should lead you to the input settings for your Sky box. Keep rotating through the input options until you find Sky TV. This will hopefully restore your television’s audio and video.

Making sure your subscription is active

If your subscription-based TV services are not working, but terrestrial-free-to-air services are, you will need to check your subscription. Go to your Sky box and check the viewing card inserted in it and the viewing card paired with it.

Your viewing experience relies on a lot of devices. While it may seem daunting at first, doing these basic troubleshooting techniques will save you some money. However, when the time comes that you will need professional help, be sure to contact us and we’ll be there to assist.

LNB 101: What It Is and How to Choose The Right One

In the past decades, satellite dishes have started replacing weaker antennas on rooftops, allowing higher signal delivery and more information reception. This translates to clear, crisps images and sounds onscreen and less room for glitches. While they will need replacing, these small satellite dishes are designed to withstand elements, including time. In moments that you want to want to upgrade its capabilities, you will need to replace the LNB.

What Is an LNB and how does it work

If you’ve seen a satellite dish mounted on roofs, you will know that it is composed of two parts. Most of it will be the concave metal that gives this machine its distinct look. The electric part attached to the metal arm is called Low Noise Block downconverter; generally referred to as the LNB or LNBF. It is also called LNB satellite or satellite LNB

As these dishes are sitting around 22,000 miles from satellites orbiting around the planet, the signal gets weaker as they travel to your home. The round plate focuses this weakened signal onto the LNB. It then does two things: amplify and downconvert. First, this object is a low-noise amplifier. As the name suggests, it gathers weak satellite signals and amplifies it. Second, it is also a block downconverter. After increasing super-high satellite frequencies on the dish, the LNB converts them to frequencies your TV cable can digest. The LNB consists of the following parts:

Low Noise Amplifier
Frequency Mixer
Local Oscillator
Intermediate Frequencies Amplifier

All of these parts help the LNB function properly. When talking about its common types, their main difference lies in the number of outputs. As this allows more satellite receivers to be added, your TV will get extra points and will enable you to connect your PVR (personal video recorder).

Single LNB

Only one cable can be connected to this LNB, allowing a standard satellite receiver like a Sky or Freesat box connection. While you can join a Sky+ or Sky+HSD, you will not have to be capable of recording one programme while you watch another.

Twin or Dual LNB

While these types are not that common in the market, it has two outputs. You may opt to either connect two separate satellite receivers or connect a PVR on the other. This works well as your first LNB purchase. However, if this is not your first time buying, we recommend installing a Quad LNB instead as a more affordable investment. The price of a Quad LNB may be steep as compared to other alternatives, but its utility is also better.

If you have upgraded to a Sky Q, you might be confused that its LNB comes with two outputs. This is a Sky Q wideband LNB and works differently. This type has two outputs: vertical and horizontal. These cables carry different services without needing to polarise the signals. While you use a Sky Q wideband LNB, your Sky Q box needs to be connected to both cables to watch all the channels and avail of Sky Q’s services. This has a higher frequency range than universal LNBs, using 300Mhz to 2340Mhz. However, this means that your Sky Q box cannot be used on a communal IRS system.

Quad

Being the most favoured type of LNB installed, they are produced in larger volumes and priced lower than the rest. As it has four outputs, you may choose to connect four satellite receivers, or two PVRs and receivers, or only one PVR. If you want a more powerful connection, you will need to have it upgraded to an Octo LNB.

Octo

As the name suggests, Octo LNBs allows you to connect up to eight separate satellite receivers or a combination of receivers and PVRs.

Quattro

One of the more common hybrids, a Quattro LNB is a practical choice for those who have multiple TVs in their home. Traditional LNBs are not the best choice for a communal IRS TV system. While this also has four outputs like the quad, a Quattro’s outputs can be used with multi-switches.

A multi-switch amplifier has separate inputs for VL (Vertical Low), VH (Vertical High), HL (Horizontal Low), and HH (Horizontal High). These are dedicated to a specific cable, polarising the signals at horizontal and vertical planes. This helps the satellite reuse the same frequency for more than one signal and transmit the same image and quality to different televisions.

Aside from these universal LNBs and Quattro, here are more LNB types: high gain, monoblock, dSCR or dCSS, etc. Though the options may be confusing, it’s essential to choose the right one for your home. There are also digital systems that come with a Sky or Freesat LNB already. However, if you want to look for your own, here are a few factors to consider:

How to pick the right one

1. Take note of the noise figure: To define some terms, the noise figure measures how much noise the LNB might add to the signal that you want to receive. The lower the number, the better your LNB will receive the weaker signals. This is often expressed in K or Kelvin.

2. Choose the LNB with the right gain level: The gain tells you how high the LNB will amplify your signal. The required LNB gain for most digital systems would be between 55sB to 65dB. It’s essential that these numbers are not affected by temperature changes, as well. Anything higher than this can cause the signals to get distorted when the LNB amplifies it, causing low-quality performance.

3. Check the stability of your local oscillator frequency: When choosing an LNB, make sure to check the frequency conversion oscillator.

Dielectric Resonant Oscillator (DRO) Types – This has a free-running oscillator that uses a small metal to determine the frequency.

Phase-Locked Loop (PLL) Types – For this type, a crystal oscillator and a digital phase circuit are used to determine the conversion oscillator frequency.

External Referenced Phase Locked Types – The satellite receiver is responsible for providing the reference signal for this type. Therefore, it is found outside of the LNB.

Choosing the right one is crucial not only for your satellite receiver but also, ultimately, for you and your family’s home entertainment. If you need more guidance choosing the right LNB upgrade for your system, make sure to contact us now!

Watching Sky TV From Multiple Rooms: A Guide

It is with no shame that we claim how Sky TV is a leading company in TV distribution: may it be satellite, aerial, or home AV. And now that Sky Q has been released, with just one box, a Sky multiroom set-up is ready to go! It would work even if there was a tv in every room, as Sky Q was built to function for TV in multiple rooms! This works best because it eradicates confusing wirework and it makes it easier to catch up on shows from any TV in your house!

Although, to any great thing there are certain problems arising. Some common issues on migrating from existing Sky TV packages such as Sky Standard or Sky HD to Sky Q are of the following:

Playback doesn’t work for you anymore

A common set up to have Sky in another room or Sky in different rooms is to use an i/0 link add-on modulator or RF2 output via a coaxial cable to reach a TV in another room. You may also have an aerial amplifier connected in the middle of the Skybox and the 2nd TV so as to create some sort of multiroom set-up. This would then sync everything up, especially your desired playback. The problem with this is that the Sky Q receiver does not support this system anymore, so we built this blog to help you fix it. 

a Sky multiroom system or having Sky Q in another room won’t work

Sky multiroom is a £10 offer to have Sky operate in multiple rooms individually inside one household. This does not work for Sky Q anymore because the LNB is not compatible anymore for this new service, rendering the old system obsolete. But don’t worry we have this blog for you to help you figure out what’s going on. 

How to have Sky Q as a Multiroom TV System

Below are some ways in which we can have the optimal tv multiroom Sky experience. 

Go Wireless

Sky offers the option to ditch wires and to have other TVs outsource from the Sky Q box to a Sky Q mini-box. This is not only efficient and space-saving but also serves as a WiFi amplifier. Sky Q makes use of the mesh wireless network so it does not disrupt your WiFi signal but you have to make sure the repeaters are in the range of the main box and in between one another. Currently, a maximum of 4 mini boxes can be installed while only 2 can run simultaneously. 

However, if you are thinking of using a Sky Magic Eye to conceive a Sky multiroom set-up, then I hate to be the bearer of bad news.  The Magic Eye, unfortunately, does not run on a Sky Q set top box but rather on standard Sky boxes, the Sky HD box, and the Sky Plus HD box. Again, the closest thing you can get to a multiscreen subscription with the Sky Q plan is by availing of the additional Sky Q mini boxes for an additional upfront cost per box. 

Run it over wired LAN

If your walls are thick or foiled and wireless is not the best way to go, try using either a Cat5e or Cat6 data cable. There are already built-in RJ45 ports in both the Sky Q box and it’s mini boxes, eliminating the hassle of wireless if that’s your problem. Although comparatively, it’s a lot of work and it limits you to 4 mini boxes still. 

Opt for Coaxial Cabling but with an HD modulator

It’s a quick fix if your current set-up is having an RF2 output or i/0 link outsourcing signal from a Sky system. You can put an HD modulator in between and have it linked to the HDMI port of the Sky Q box. This would make it a sort of digital multiplex and have it connect to your aerial amplifier turning it into some sort of a Sky Q multiscreen that can be viewed as a digital channel. Be careful though, choose wisely on the UHF output on the modulator so it would not clash with the transmission of other signals in the area. 

The only problems that come with this are modulators are a luxury in the market right now. The price might be too steep to justify this fix unless you have the pounds to spare. Another problem here is having 4K transmitted from your Sky Q box. Unfortunately, an HD modulator can’t do this, so you get yourself an HDMI switch to fix this. Now you have to run HDMI cables from the 4K TV to the switch then to the modulator to fix the solution, but it’s a hassle and a dent on your finances. A good thing to note about this though is that you get to have the pictures in a clearer digital format that an RF2 or i/0 can’t provide.

Final Thoughts

While Sky Digital TV’s Sky Q requires you to completely overhaul your multiroom viewing set-up, it does improve the overall viewing experience. This multiscreen subscription package ensures that while you are viewing from essentially one main TV box, it will look, feel, and sound as though you’ve got multiple Sky TV packages running in your home. 

Additionally, you will get access to Sky TV, Netflix, YouTube, Spotify, BBC iPlayer, ITV Hub, All 4 and many more! Sky Q offers several channels on 4K Ultra HD, and a choice between a 1TB box or a 2TB box, both of which are UHD-ready. For an extra cost, you may also avail of Sky Ultimate TV, Sky Sports, Sky Cinema, and the ultimate On Demand TV options. If it interests you, may opt-in for access to BT Sport with Sky, Sky Box Office, the Sky Store, Sky Go Extra, and many more. 

For existing Sky customers, you may upgrade to Sky Q by contacting your service provider directly. Meanwhile, for those looking to switch over to Sky from other service providers,  you may want to check this out and make sure you’ve got the right kind of satellite dish for the TV deals you want to avail. To do this, you may call us to set up an appointment.