For countless years, watching television shows have become a common human activity. Whether it’s for watching the news, sports, or your favourite show, having clear signal reception is key. As the dependency for television grows, it is essential that your household is equipped with the right accoutrements to ensure a pleasurable watching experience.
Regardless if you’re watching from Freesat or through a paid subscription service, you want to make the most out of your limited telly time. Usually, when you get weak reception, the solution is to go to the shop and purchase a TV Signal booster. However, this could be an unnecessary expense given the following scenarios.
Poor reception can be caused by many things. It would be good if you try to fix these first before buying a TV Signal booster.
Obstructions such as buildings and trees act as a barrier and make it hard for your satellite dish to receive signal. Position your satellite dish away from these obstructions to provide your television with the optimal TV Reception.
Small Satellite Dish
There are cases when the satellite dish installed for your home does not suffice for your satellite dish requirements. The standard satellite dish size installed in most UK houses is 45 cm. However, in cases where the user is located far away, a bigger dish, up to 3 m in diameter may be required. This is so that residents in distant locations can still get TV reception.
Another reason why you may be experiencing a signal loss is due to frayed cables. Run a thorough check on your cables. Some may need to be replaced so you can enjoy watching your favourite TV show without any difficulty once again.
Wrong Satellite Positioning (Azimuth)
Depending on your use of your TV and the shows that you watch, there are certain angles that you need to position your satellite dish. Here is a table on which angles are for which TV Services
|28.2 E||Astra 2 Satellites||Freesat, Sky Subscription|
|28.5 E||Eurobird||Freesat, Sky Subscription|
|19.2 E||Astra 1 Satellites||French and German Shows|
|13 E||Hotbird||European and North African Regions|
Once all of these has been fixed and you’re still getting an unstable signal strength, then it’s time to buy a TV booster. Installing the TV Signal Booster is another tricky part. Uninstalled properly, this will do nothing or worse, worsen your signal loss altogether.
In an ideal setting, hiring professionals would do the trick. They would come in, do a complete TV aerials installation or satellite dish installation, and guarantee a pleasurable watching experience. However, not only can Aerial signal boosters be expensive, in most cases, you can do it yourself without any difficulty. You just need the know-how.
Below is how to properly install a TV Signal Booster.
Identify a good spot in your television cable where you can install the booster. Don’t just choose a random spot. If you only have one Digital TV, then you can install the Digital TV Booster Amplifier near the Television. Don’t put it too close to the power supply though so it doesn’t create any issues. However, if you’re using the Booster Amplifier to boost multiple Digital TVs, it’s better to install the TV Booster near your distribution amplifiers or Antenna Line splitter.
Unscrew the cable from your Digital TV or distribution amplifiers. Connect a cable from your TV booster to your Digital TV ’s input or if you’re using distribution amplifiers, connect it there. Make sure that the connection is not too tight as this can lead to a shorter lifespan.
Connect the cable from the TV Aerial or Satellite Dish to your TV Booster. This will complete your setup as your HD Digital TV will now be reconnected to your Aerial or Satellite Dish and will be getting TV Reception once again.
Plug your TV Booster into the power supply to turn it on. This will provide amplify your Digital TV’s signal strength.
Get a bowl of crisps. Sit back. And spend hours watching on your Digital TV.